Gas booster pump

Introduction to Gas Pressure Pump

Fuente's "Gas Pressure Pump" can be applied to various non corrosive gas pressurization Maintain pressure. The gas booster pump can be selected based on the model of the gas booster pump, taking into account the pressure used on site. The range of gas pressurization and pressure maintenance is 6-80MPa. Generally used for insufficient local pressure Need to increase gas pressure Add pressure to the gas cylinder and fill it with cans inflation. Airtightness test and inspection.

Characteristics of gas booster pump

1. The driving part of Fuente's "Gas Pressure Pump" is made of aluminum alloy and stainless steel Partial oxidation treatment. The sealing ring is a high-quality product imported from Germany.

2. The directional valve is driven by built-in pneumatic drive No need for electricity for easy maintenance.

3. The drive is pneumatic No need for any power source Suitable for explosion-proof workshops and various explosion-proof occasions Suitable for various factories and laboratories with a pressure of 3-8 bar.

4. The driving of the gas booster pump is divided into cylinder diameters of 160mm, 125mm, 100mm, and 80mm. The booster cylinder of the booster pump is determined by the boosting ratio, and the area of the booster cylinder is proportional to the driving ratio. Because the size of the piston is proportional to its area The driving intake pressure can be adjusted to regulate the gas pressurization pressure Perform stepless pressure regulation.

5. Fuente's "Gas Pressure Pump" increases with the pressure of the pressurized gas The reciprocating speed of the pump will gradually slow down After the pressure on both sides reaches equilibrium, work will stop. Enter the pressure holding state When the pressure of the pressurized gas decreases According to the law of conservation of pressure, the gas booster pump starts working without pressure.

6. Fuente's gas booster pump has a small volume Reasonable design Lightweight Convenient to carry and can be installed in machinery and various spaces with limited space It can also be used separately.

Model and specific parameters

4 Scope of application

Insufficient local air pressure. pipe fitting. Valves Pressure vessel pressure resistance testing.

Static airtightness testing.

Various tests that require gas pressure pressurization.

Various low flow non corrosive gas pressurized applications.