Laser cutting dedicated oxygen pressurization system

Laser cutting machines require different auxiliary gases such as oxygen to cut different materials Nitrogen gas air Different thicknesses of cutting materials The pressure and required flow rate of its auxiliary gas are different.

It is generally more cost-effective to use oxygen for cutting carbon steel Oxygen is used as a laser beam projection point on metal surfaces Heating steel brings about exothermic reactions Bring the temperature of the area to the melting point The melted metal was blown away by the wind A cutting surface with a smooth oxide layer formed by detachment from the material. The general requirement is a pressure of 0.3-0.8Mpa, with some cases requiring a pressure of 1.5Mpa. The cutting mouth is generally 0.02-0.05Mpa. When the pressure of the oxygen generator cannot reach that level, choose the oxygen laser cutting machine pressurization system Raise the original oxygen pressure to 0.3-1.5MPa.

Oxygen cutting dedicated pressurization system
The pressurization system of oxygen laser cutting machine should be selected according to the on-site usage situation The flow rate of oxygen consumption What pressure does oxygen need to reach Please consult the sales engineer for detailed information.

Tank type oxygen pressurization system