How to select a carbon dioxide booster pump? Remember the 'Five Elements'

Technical support inquiry / 2026-08-05 09:18:08 二氧化碳增压泵台州菲恩特泵体设计

Carbon dioxide, as a medium, is closely related to our daily life, industrial production, chemical experiment research, and supercritical extraction. Ordinary carbon dioxide is usually stored or used in the form of steel cylinders, or in the form of Dewar tanks. But their initial pressure restricts the research and use of carbon dioxide. Now, the editor will take everyone to pay attention to how to select the booster pump needed to increase the pressure of carbon dioxide.

The selection of carbon dioxide booster pump is generally related to the following "five elements"

Firstly, the driving air pressure is the power source for driving the pump. Generally, a 3-8bar air source and an air compressor with a displacement of about 1m ³/min are required at the customer's site.

Then, how much pressure does the carbon dioxide need to be pressurized for use, and what are the operating conditions required for on-site use? What is the desired output flow rate of the carbon dioxide booster pump? Fuente Sales Engineering will recommend products that are suitable for you based on experience.

Furthermore, what is the use of carbon dioxide after pressurization? (Filling, chemical reaction, physical foaming, extraction, recycling, etc.)

Also, what is the source of carbon dioxide? The medium state is equal to gas, liquid, and gas-liquid. Fuente personnel will roughly determine the pump category based on the medium state you provide.

Finally, if there are any special requirements, they can be communicated and confirmed with Fuente's technical department. We can definitely tailor a carbon dioxide pump that is suitable for your use.

Choosing a carbon dioxide booster pump is not difficult, and remembering the "five elements" of the appeal can avoid the dilemma of selection.

Liquid carbon dioxide booster pumpGaseous carbon dioxide booster pumpCO2 filling pump