What is the air consumption of the air booster pump? How to achieve stable output pressure of air booster pump

Air booster pumps are specially designed products for factories to solve the problem of low pressure in general situations. They have the characteristics of reliable structure, long service life, and high stability. They achieve reciprocating operation of the pump through the directional valve inside the pump, and adjust the output pressure by adjusting the driving air.

So, what is the specific air consumption of the air booster pump? Generally speaking, the number of pump operations determines the air consumption of the pump. The faster the pump frequency, the greater the air consumption of the pump. Moreover, for the same boost ratio, the larger the cylinder diameter of the pump, the greater the air consumption. Generally, for a Feentor air booster pump with a cylinder diameter of 160mm, the air consumption is 1m ³/min, and for a cylinder diameter of 80mm, it is 0.5m ³/min. Generally speaking, when the pump pressure reaches the required level, it will stop working and no longer consume energy.

So how to maximize the output flow of the pump?

Firstly, the intake pipe and driving air supply pipe of the air booster pump should not be too thin. Secondly, the intake pressure of the pump should not be too low. If it is too low, the pressure difference between the inlet and outlet of the pump will increase, and the output flow rate of the pump will decrease. On the contrary, the traffic will increase.

In addition, the output flow rate of the pump is related to the cylinder diameter, stroke, and number of fixtures of the selected pump.

Advantages of air booster pump

Install a booster pump in the corresponding local air circuit. Although the overall air circuit is low-pressure, high-pressure equipment can be used locally to maintain the high-pressure demand of a certain part. Compared to the entire gas circuit of a booster factory, it is economical and affordable. Meets the requirements of national energy conservation and emission reduction, and meets some of the high voltage demands of the factory.

Air booster pump