Why is the pressure higher when choosing an air booster pump

Why is the pressure higher when choosing an air booster pump

For production enterprises, sometimes air booster pumps are a necessary choice. Air booster pumps not only provide power to enterprises, but also strive to reduce energy consumption and achieve cost reduction requirements. In modern society, the country vigorously advocates the development policy of energy conservation, emission reduction, green and environmental protection, and air booster pumps are widely used to replace high-pressure air compressors. Compared with high-pressure air compressors, air booster pumps have multiple advantages such as low energy consumption, less land occupation, low noise, environmental protection, and high cost-effectiveness. When choosing an air booster pump, we generally refer to factors such as pressure and flow rate. When choosing, we usually choose an air booster pump with a relatively higher pressure. Below, the editor from Taizhou Fuente will give you a brief introduction.

When choosing an air booster pump, it is necessary to select the corresponding higher pressure according to the pressure level. For example, if the existing air source is 5 bar (kg) and needs to be boosted to 10 bar, the ZTM03 air booster pump should be selected. The ZTM03 is a triple booster pump that can boost the original 5 bar pressure to 15 bar and reduce it. This will have several benefits.

1. Compressed air will cause a certain pressure loss during transmission, and when the pressure reaches the end use, it can ensure that the pressure is sufficient for the normal use of the equipment.

Pneumatic air booster pump

2. Stable pressure, no matter what type of gas booster pump is used alone, it will form pulses, and there will be no pulse problem when using high-pressure decompression.

When the pressure is high, the flow rate will also be large. When the flow rate is insufficient, the gas will infinitely amplify, leading to a decrease in pressure.

4. When the air booster pump approaches the set pressure peak, the flow rate will decrease until it stops. Choosing a booster pump with just the right pressure ratio will affect its flow rate.

The above is an analysis by Taizhou Fuente Fluid on why choosing an air booster pump with a pressure higher than the operating pressure is beneficial. We hope it can be helpful to everyone. Taizhou Fuente Fluid Co., Ltd. is a professional manufacturer of various non-standard fluid control systems. Its main products include pneumatic pneumatic booster pumps, pneumatic liquid booster pumps, various specialized booster pumps, pressure vessel explosion test benches, pressure pulse test benches, CNG vehicle modification airtightness test devices, and natural gas cylinder detection equipment. Stamping equipment includes bolt and nut press fitting machines, rivet free connection machines, etc.

Air booster pump