Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
Introduction to similarities and differences between gas booster pump and air booster pump
Introduction to similarities and differences between gas booster pump and air booster pump
1、 Similarities
1. They all belong to the category of pneumatic booster pumps, which do not require electricity and can be used to boost non corrosive gases. They can all be used in the field of gas boosting and lifting, and pneumatic boosting and lifting are important components of the fluid control industry. The driving pressure range of gas booster pump and air booster pump is 3-8 bar, and the more economical driving pressure is 6 bar.
2. Their output pressure is a multiple of the driving air pressure, and the calculation method is similar. They can all be made into automated complete sets of equipment that are more convenient for customers to use and operate.
3. Both air booster pumps and gas booster pumps have high requirements for driving pressure, which must be clean, dry, and moisture free. The on-site usage environment should be as clean as possible, without too much dust, etc
4. The higher the boost ratio, the corresponding flow rate will decrease and the output pressure will increase.
2、 Different points
1. In principle, an air booster pump can only boost air and cannot boost gas. Gas booster pumps can boost gases, including air, nitrogen, oxygen, helium, hydrogen, methane, and other non corrosive gases.
2. Air booster pumps are generally used for local lifting of compressed air in factories, while gas booster pumps are more commonly used for gas output, boosting, filling, testing, and so on
Air booster pump
Air booster pump
The above article is from the official website of Fuente. Plagiarism will be prosecuted!
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
