What are the essential factors for a good compressed air boosting system

When the compressed air pressure in the workshop is low, most manufacturers will use a compressed air boosting system to increase the workshop air pressure to meet the usage standards. There are many models of compressed air boosting systems circulating on the market now, with varying quality, and some are refurbished parts. At this point, it is time to test the purchasing vision and experience. Below, I will give you a brief introduction to prevent being deceived.

A good compressed air boosting system must first pass the quality standards. According to national regulations, those with a capacity of 40L or above must have a certificate. The certificate is not a piece of paper but a book (which can be checked by our sales team) with the seal of the Quality Supervision Bureau on it. Don't be fooled by the manufacturer. Looking at the pressure relief valve again, the compressed air booster pump can greatly increase the original air source. After years of use, the inner wall of the air storage tank will corrode and become thinner. In this case, a pressure relief valve is needed to protect it. However, some manufacturers may buy cheaper pressure relief valves to save costs, which may cause hidden dangers when the pressure is reached and will not jump. High voltage connecting pipes should be made of metal hard pipes, which can be used

Heat dissipation and aging resistance. The high-pressure outlet should be equipped with a pressure reducing valve, and the pressure inside the air storage tank must be pressurized with a compressed air booster pump. Using a pressure reducing valve to reduce pressure can extend the service life of the booster pump.

These are essential conditions for ensuring the reliability of compressed air boosting systems. On this basis, select the performance and quality of the air booster pump. When selecting an air booster pump, it is important to consider its cylinder diameter and length. The larger and longer the pump, the greater the boost flow rate. The material determines its service life, and Fuente has always insisted on using 304 stainless steel material to ensure its service life.

Air booster pump