Why does a high-pressure needle valve need to be used to make a set of hydraulic testing equipment for a gas-liquid booster pump?

---

The output pressure of the gas-liquid booster pump is high, with a pressure output of up to 6000psi. Mature design and high-precision requirements require a matching ultra-high pressure needle valve to form the most perfect water pressure testing equipment. Ultra high pressure needle valves can use most hydraulic oils, and most chemical media (corrosive media need to be specified in advance) of water machines are almost the same as the suitable media for pumps. The best match for the needs of hydraulic equipment.

READ MORE

What are the comparative advantages between pneumatic and electric liquid booster pumps?

---

What are the comparative advantages between pneumatic and electric liquid booster pumps? 1. High output pressure, with a maximum output pressure of up to 400Mpa. Electric pumps are usually within 200Mpa, and the noise of electric pumps is much higher than that of pneumatic pumps. The noise of the pneumatic liquid booster pump is 63 decibels. 2. Widely applicable, working media include hydraulic oil, water, and most chemical corrosives

READ MORE

What are the applications of Feentor brand nitrogen booster pump? What are the specific aspects reflected in?

---

The Feentor nitrogen booster pump adopts a single gas controlled non-equilibrium gas distribution valve to achieve the reciprocating motion of the pump. The pump body is made of aluminum alloy and stainless steel, and all seals are imported high-quality products. The maximum design driving pressure is 10 bar. To ensure the service life of the valve, it is recommended that the driving pressure be ≤ 8 bar.

READ MORE

Introduction to the principle of gas-liquid booster pump and liquid booster

---

1、 Introduction to the principle of liquid booster pump gas-liquid booster Pascal's law is a law of fluid statics, which states that when any point in an incompressible stationary fluid experiences a pressure increase due to external forces, this pressure increase is instantly transmitted to all points in the stationary fluid. People have used this law to design and manufacture fluid machinery such as hydraulic presses and hydraulic drive devices, and gas-liquid booster pumps are also related to this principle;

READ MORE

Pneumatic liquid booster pump is required for hydraulic testing machine.

---

Gas driven liquid booster pump, also known as gas-liquid booster pump, adopts a single gas controlled non-equilibrium gas reversing valve to achieve automatic reciprocating operation of the pump. The pump body drive cylinder is 80mm, 100mm, 125mm, 160mm, 250mm. The pump drive part is generally made of aluminum alloy, and the liquid receiving part is made of 304 stainless steel. It can also be installed according to customer requirements to customize different material air pressure. The inlet pressure determines the output flow rate of the pump.

READ MORE