Can the hydraulic test bench perform blasting tests? What is the difference between it and blasting testing?

Can the hydraulic test bench perform blasting tests? What is the difference between it and blasting testing?

With the development of industry and the requirements of industry. More and more products, such as pressure bearing components such as hoses, metal pipes, pressure vessels, valves, shells, etc., require hydrostatic testing. The application of hydrostatic testing benches is becoming more and more widespread, and blasting testing benches are used to test the ultimate strength of products, usually for non-destructive testing. The pressure for blasting testing is generally higher than that for water pressure testing. However, the pressure test bench is usually unable to perform burst testing, and burst testing can sometimes perform hydrostatic testing.

The difference in the selection of the two test benches is that the pressure ratio of the pneumatic liquid booster pump used for the internal core component water pressure test is generally lower than that of the core component of the blasting test bench. Of course, when customers purchase equipment, they can make two types of pressure and explosion test benches into one according to their on-site requirements. The water pressure and pressure burst test bench can conduct phased pressure tests according to customer requirements, observe the pressure holding effect of the tested piece, and then perform pressure boosting for burst testing. Especially for computer test benches, there are strict requirements for explosion and pressure testing. If the pressure difference between explosion testing and pressure testing is not significant, they can be achieved by sharing a pump. But in situations where there is a significant difference in pressure, one or more pumps are needed for testing experiments.

Whether it is a blasting test or a pressure resistance test, it is necessary to test the pressure performance of the product and is indispensable in the current production situation. However, with the development and progress of China, in the fields of pressure resistance and explosion testing, it has now reached the international standards required, and some specific areas have already been perfected. But at the same time, there is also a certain gap in the same field. So Feentor Company has been tirelessly working on research and conversion in the fluid pressure and conversion industry.

hydraulic pressure testing machineHydraulic test bench