In an increasing number of airtightness experiments, the application of high-pressure special gases is involved, and it is found that the original gas pressure is far from enough or wasted too much to be recovered. Here we recommend a gas booster pump for pressure boosting.
Nowadays, the pressure requirements for gas sources in airtightness experiments are becoming increasingly high. If the gas source pressure is not enough in the experiment, a gas booster pump can be used to increase the pressure. To meet the low pressure requirements of airtightness experiments, Taizhou Feentor ZTA. ZTD or ZTT series pneumatic booster pumps can be selected to increase the original pressure by 2-100 times to meet the needs.
In order to save costs, it is necessary to use a gas booster pump to pressurize and recycle the gas emitted into the atmosphere after expensive gas tightness experiments.
Parameters of gas booster pump:
Boosting medium: various non corrosive gases.
Boosting range: 0-80MPa.
Turbocharger flow rate: 980L/min
The above content belongs to the copyright of Taizhou Feentor - Plagiarism will be prosecuted
