Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
What accessories are needed to make the ZTD10 gas booster pump into a system?
The customer's on-site driving pressure is 8bar-9bar, which is very stable, but currently needs to be increased to 50bar to check a 100cm ³ valve, hoping that the larger the flow rate, the better;
According to the requirements, the configuration is as follows:
(1) One ZTD10 Feentor gas booster pump (single-stage double acting);
(2) High pressure pipeline 1.5M
(3) 1 high-pressure output pressure gauge (8MPA)
(4) Oil water separator (binary unit)
(5) High pressure ball valve (20MPA)
ZTD10Nitrogen booster pump
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
