The application of compressed air booster pumps in industry is increasing, and there are more and more ways for customers to use them on site. Gas booster pumps for local boosting, especially those with high flow rates, are becoming more and more widely accepted by customers
The parameters of the compressed air booster pump are as follows
Model: ZTS-ZTA02
Flow rate: 1m ³/min
Gas storage tank: 40-100L
Pressure: 0-20bar
Boost ratio: 2:1
Typical application of compressed air booster pump
(1) Continuous purging of impurities and nitrogen protection with 15 bar gas in the laser cutting industry
(2) Spray coating on kitchenware, using 8 bar air assisted spray coating
(3) The airbag is used to replenish air and maintain pressure, and the pressure requirement is constant without dropping
(4) Rapid inflation inside the high-pressure gas cylinder requires a pressure of 20 bar
(5) Automobile repair and replacement factories require pneumatic wrenches and tools to provide 10 bar air pressure
(6) Low pressure gas spring internal inflation and lifting chair internal gas inflation
The characteristics of compressed air booster pump are
(1) The pressure can be adjusted from 0-20 bar, and the flow rate is related to the inlet pressure, up to a maximum of 1.36 m ³/min
(2) Pressure can be freely adjusted and controlled
(3) The high-pressure outlet is equipped with a pressure reducing valve for easy pressure control
(4) Low equipment maintenance rate and simple maintenance
(5) The gas storage tank is safe and comes with a pressure safety container certificate
(6) Configuring safety valves to further ensure safe use
(7) Safe, spark free, explosion-proof
Typical circuit diagram of compressed air booster pump


