Popular knowledge of pneumatic gas booster pump, allowing you to understand what pneumatic booster is.

Technical support inquiry / 2026-07-23 15:08:00 气体增压泵空气增压泵

Let me explain to you a pneumatic booster product that is closely related to industrial production - the pneumatic gas booster pump, also known as an air booster, air booster pump, air booster, and so on

Pneumatic gas booster pump is generally a pneumatic control valve used for secondary local boosting of air compressors in factories,

Its working principle is similar to that of a two-stage pressure booster. A pneumatic gas booster pump applies a lower air pressure to a large-diameter driving piston. When the pressure of the pneumatic gas booster pump acts on a small area piston, a high-pressure gas is generated. Through a two position four vent valve, the air booster can achieve continuous operation. The internal directional valve allows the driving gas to alternate between the bottom and top surfaces of the piston. Control the internal directional valve through two two-way valves.

Application scope of pneumatic gas booster pump:

1. During factory machine operations, a higher gas source is required than the on-site compressor;

2. Airtightness testing of shells, valves, pipelines, and pressure vessels;

3. The high-pressure gas station inside the laboratory is used for replenishing air;

4. The recycling and reuse of low-pressure expensive gases;

5. Fill the high-pressure reactor with high-pressure gas, etc;

Advantages of pneumatic gas booster pump:

1. Small in size and easy to carry. Outdoor homework during time;

2. Continuous adjustable pressure, adjusting the driving air pressure to regulate the output pressure;

3. There are various types and different models of boost ratios to choose from;

4. Easy to operate and maintain;

5. Gas driven products, no need for power supply, explosion-proof;

Disadvantages of pneumatic gas booster pump;

1. The gas consumption is relatively high when the valve is open;

2. The output traffic is small. Unable to meet the working conditions for large flow on-site use;

3. The product has strict environmental requirements and does not allow excessive dust particles or other impurities;

4. There is a certain gap between the gas high-pressure valve series and foreign products;