Why is a pneumatic booster pump equipped with a binary system?

Another name for the two-piece: Air source processing two-piece. So what role does it play in pneumatic boosting equipment?

The filtration degree of the air pressure booster pump in the binary system is generally 50-75 μ m, and the pressure regulation range is 0.5-10Mpa. If the filtration accuracy needs to be 5-10 μ m, 10-20 μ m, 25-40 μ m, and the pressure regulation needs to be 0.05-0.3Mpa, 0.05-1Mpa, the components formed by the binary system without pipe connection are called binary components.

Pneumatic boosting and pneumatic pressure testing

The two-piece system is an indispensable air source device in most pneumatic boosting systems, which needs to be installed near the gas equipment. It is the final guarantee for the overall quality of compressed air and an important guarantee for the good operation of pneumatic boosting products.

The installation sequence of the triad is air filter, pressure reducing valve, and oil mist device according to the intake direction. The combination of an air filter and a pressure reducing valve can be called a pneumatic two-piece. Due to the separation of the boosting cylinder and the driving cylinder body of the pneumatic boosting product, lubricating oil needs to be added to lubricate the driving cylinder body of the oil mist device inside the binary system. But it will not cause pollution to the pressurized medium.

The pressure reducing valve can stabilize the gas source, keeping it in a constant state without causing damage to Feentor dynamic boosting products (the driving pressure should be ≤ 8.3 bar). It can reduce the damage to the pneumatic booster pump or boosting equipment caused by sudden changes in gas source pressure. Filters are used for cleaning the air source and can filter out moisture from compressed air to prevent moisture from entering the interior of the pneumatic booster pump and causing a decrease in its lifespan.

The oil mist device can lubricate the driving part of the pneumatic booster pump and lubricate the components that are lubricated with oil, greatly extending the service life of the pneumatic pump.

As can be seen from the introduction of the appeal, a small binary system can bring many benefits to the pneumatic gas booster and liquid booster pump products in your factory, and their prices are not expensive. Configuring one is a wise choice.

Pneumatic air booster pumpSchematic diagram of pneumatic booster pump