Why do gas booster pumps and air boosting systems need to add a binary system?

Why do gas booster pumps and air boosting systems need to add a binary system

As is known to those who have used gas booster pumps and air booster systems, the equipment or pneumatic booster pumps produced by Feentor Fluid Control Co., Ltd. are equipped with binary units. The main function of a binary system is to filter moisture and atomize lubricating oil, and regulate pressure. So what role does it play in the air boosting system of a gas booster pump? Below, the air booster pump editor will give you a detailed introduction.

The main body of the binary system is divided into three parts: the filter water cup, the pressure regulating valve, and the atomizing oil cup, each of which has its own function. When using equipment, the binary system can mainly solve six major problems, including water control, pressure control, cooling, lubrication, sealing, and noise reduction.

Water control: The water cup of the binary system is only used for simple water filtration and cannot be used as its main filtering method. It also requires regular manual discharge of water from the cup.

Pressure control: The main core of the gas booster pump air booster system is the pneumatic booster pump. The pneumatic booster pump relies on compressed gas as a power source, and the pressure after being boosted by the boosting medium is proportional to the power source. So adjusting the driving pressure can control the output pressure.

Cooling: When lubricating oil is atomized through the oil cup and mixed with compressed gas, it enters the directional valve and quickly adheres to the directional valve core and valve cover, providing a certain cooling effect.

Lubrication: When lubricating oil is mixed with compressed gas and enters the directional valve and drive cylinder, it adheres to the sealing ring and has a lubricating effect, which can effectively extend the service life of the air boosting system of the gas booster pump.

Sealing: When the gas booster pump and air booster system are used for a long time, the sealing ring will inevitably wear out. At this time, lubricating oil increases the sealing between the sealing ring and the cylinder.

Reduce noise: When lubricating oil mixes with compressed gas and enters the directional valve and drive cylinder, it adheres to the sealing ring. Reducing its frictional resistance has a certain noise reduction effect.

Do you find it incredible that a small binary system can play so many magical roles in a gas booster pump air boosting system? To learn more about fluid control equipment or pneumatic booster pumps, you can visit the official website of Taizhou Feentor Fluid Control Co., Ltd. www.tz-fet.com.

Air booster pump