Precautions for the use and maintenance of air booster pumps and gas booster pumps.

There are many things to pay attention to when operating and maintaining air booster pumps and gas booster pumps. Below, the editor will introduce them to you.

Before introducing, we need to understand that air booster pump and gas booster pump belong to the same category of pneumatic booster pump, both of which rely on compressed air to drive and achieve the pressurization of the pressurized gas.

Gas booster pumps are often used to boost non corrosive gases such as nitrogen, oxygen, helium, oxygen, hydrogen, methane, etc. Air is generally used to boost compressed air in factories or gas areas. Below, we will provide a detailed introduction to its usage precautions and maintenance.

Firstly, when using air booster pumps and gas booster pumps, it is necessary to adjust the driving pressure to ≤ 3-8 bar. The economical use pressure for driving pressure is 6 bar. In addition, the driving pressure must be kept clean, dry, and free of moisture. Generally, customers are required to install oil-water separators and binary units to ensure the normal operation of the booster's driving cylinder body and directional valve, and to prolong the service life of the sealing ring!

Secondly, filters should be installed at the IN (inlet) pressure of the air booster pump and gas booster pump to ensure the cleanliness of the pressurized gas medium and provide secondary protection. In addition, if the pressure at the high-pressure outlet is too high, it is recommended to install protective measures such as bursting discs. If a buffer tank is required for the high-pressure outlet, it is necessary to purchase a pressure vessel with a pressure rating higher than the rated output pressure of the pump body (with a pressure vessel certificate).

When performing maintenance on the air booster pump and gas booster pump, it is necessary to do so in the absence of air pressure. Turn off the drive, turn off the intake pressure, and unload the high-pressure output pressure before performing maintenance. Additionally, it is recommended to communicate with Fuente technicians or provide video guidance for maintenance.

Air booster pump

Gas pressurization system