A gas boosting system for valve A-level certification - gas drive type

    Special for valve certification of gas boosting system

    Technical support inquiry / 2026-07-25 14:12:25 气体增压系统哪家好 气体增压机

    The valve certification for gas pressurization system has the following characteristics


    1. Gas driven boosting does not require electricity consumption, is easy to operate, and easy to maintain. It has good applications in valve certification. Can conduct air tightness testing and pressure relief testing on products, etc


    2. The output pressure can be adjusted by adjusting the driving air pressure to adjust the output pressure. Simply setting the driving air pressure output pressure can achieve the corresponding adjustment.


    3. There are various control methods, including manual, PLC, and industrial control models.


    The parameters of the gas booster pump are as follows

    驱动气压范围

    3-8bar

    输出压力范围

    0-40MPa

    实际增压比

    10-60:1

    流量

    136L/min(被增压气体入口为8bar)

    大耗气量

    1000L/min(驱动气压耗气量)

    入口压力范围

    0.1-10bar

    出口压力计算公式

    50*驱动气压+3.5*被增压气体入口

    设备噪音

    63分贝

    增压介质

    氮气 氦气 氩气等

    设备配件

    油水分离器（驱动口）

    驱动口

    12mm （快速接头）

    低压入口

    NPT1/4

    控制方式

    PLC-手动型

    精度

    千分之五

    触摸屏尺寸

    7寸

    设备尺寸

    750*550*920（mm）标准

    Valve Certification Gas Boosting SystemGas pressurization systemGas pressurization equipment

    LATEST NEWS

    点击阅读更多内容
    本站使用百度智能门户搭建 管理登录