Mobile phone: 18815239758 (same as WeChat)
Phone: 0576-89881178
Phone: 0576-89825885
How to repair the air booster pump
Many customers are not very familiar with air booster pumps. In fact, the composition of air booster pumps is not too complicated, and maintenance is also very convenient. In this article, the editor will explain how to identify the cause and repair the air booster pump normally when it is broken.
Firstly, let me introduce common problem 1: The air booster pump is not working. At this point, it is necessary to check whether the driving air source is turned on and whether the pressure has reached the opening condition? Has the pressure of the two gases reached equilibrium? If everything is fine, check if the sealing ring of the directional valve is damaged and replace it. 2: The air booster pump changes direction before reaching its travel speed. At this point, there are generally three factors that can cause: 1) deformation of the air booster pump firing pin or damage to the sealing ring, 2) damage to the internal high-pressure sealing ring, and 3) damage to the external air duct. 3: The pressure of the air booster pump is not proportional. Check if the inlet and outlet check valves of the booster pump are damaged, and if the high-pressure sealing ring is scratched, replace it in a timely manner.
Fax: 0576-89888385
Address:4th Floor, Building 2, No. 78 Huibin Road, Xinqian Street, Huangyan District, Taizhou City, Zhejiang Province
Email: vic@tz-fet.com
