When using a compressed air booster pump, it is important to pay attention to the environment when using a gas booster pump

When using a compressed air booster pump, it is important to pay attention to the environment when using a gas booster pump

Compressed air booster pump and gas booster pump have certain requirements for the usage environment, and cannot be placed anywhere. Just like an air compressor, it requires open use, good ventilation and heat dissipation, less floating and sinking in the air, low humidity, and no corrosive gases. So the compressed air booster pump and gas booster pump will also have all the requirements for the installation site. The following installation scenarios should be avoided as much as possible.

1: The place of use contains corrosive gases, such as corrosive gases in the air of various chemical sites. Compressed air booster pump and gas booster pump have self-priming function, which will suck corrosive gases from the on-site air into the drive cylinder, causing the sealing ring to corrode. In addition, the leakage of the booster pump itself in corrosive gases will also accelerate the aging of the housing.

2: In high-temperature places, such as boiler high-temperature workshops, prolonged use of booster pumps when the on-site temperature is too high can cause fatigue on the sealing ring, which can accelerate the wear and aging of the sealing ring.

3: In places with high levels of floating dust, such as the mining and textile industry, if the dust is not cleaned up for a long time, it can cause the compressed air booster pump gas booster pump breathing hole to become blocked or enter the interior, resulting in damage or malfunction of the booster pump.

4: Wet places, such as the offshore oil extraction industry. The sea air is relatively humid and corrosive, which can cause internal water accumulation and corrosion in the booster pump, resulting in damage to the booster pump.

When installing a compressed air booster pump or a gas booster pump, it is important to choose the correct environment. If conditions permit, additional configurations or treatments can be added. If the usage environment is not good, it will have a certain impact on the performance and efficiency of the booster pump, which may lead to frequent failures or shortened service life. If you have any questions, you can visit the professional website www.tz-fet.com of Taizhou Feentor Fluid Control Co., Ltd.

Compressed air booster pump

Compressed air booster pumpCompressed air boosting system