How to install and use a pneumatic gas booster pump?

With the advancement of technology and the rapid development of modern industry, the diversified and complex demands of industry for various energy sources have evolved from the initial use of steam and electricity to the current use of various gases and energy sources. With the diversification of gas energy use, the initial pressure of various gas production equipment can no longer meet the requirements for use. At this point, a pneumatic gas booster pump was born. In this article, the editor will explain how to install and use a pneumatic gas booster pump.

Firstly, we need to understand the structure of the pneumatic gas booster pump. The main body of the pneumatic gas booster pump can be divided into three parts: the booster cylinder, the drive cylinder, and the control part. The principle is to use the low-pressure gas from the large piston of the driving cylinder to push the small piston of the high-pressure cylinder to compress the backup pressurized gas, in order to achieve the compression and pressure increase effect. The main function of the control part is to control the direction change and stop of the booster pump. The main air circuit has three driving inlets, a pressurized air inlet, and a high-pressure outlet. A low-pressure hose is sufficient for driving, and the pressurized medium should be connected to a high-pressure pipe of the corresponding level depending on the initial pressure. The thread should correspond to the relevant specifications. Connect the fixed seat according to regulations.

When using, it is necessary to first check whether the connections between each joint and the high-pressure pipeline are loose, then open the pressurized medium gas source according to the steps, open the driving gas source to adjust the driving gas source pressure to obtain the required high pressure and accurate pressure, and lock the driving pressure regulating valve to ensure stable high pressure without overpressure in the future.

Pneumatic gas booster pumpPneumatic gas booster pump